Skip to content
Industrial gas detection for demanding environments

Technical articles & guides

Explore monitoring tasks, prepare project requirements and understand the questions to ask before selecting equipment.

Browse technical articles
Eranntex technical guide cover: What does a 4-gas monitor detect? Product photographs of the BTYQ-MS104K-M and BTYQ-MS400-S portable gas detectors.
From the technical libraryWhat Does a 4-Gas Monitor Detect? Gases, Limits & Selection

5 of 5 articles

Eranntex technical guide cover: What does a 4-gas monitor detect? Product photographs of the BTYQ-MS104K-M and BTYQ-MS400-S portable gas detectors.
Technical guide

What Does a 4-Gas Monitor Detect? Gases, Limits & Selection

A common 4-gas monitor measures oxygen, carbon monoxide, hydrogen sulfide and combustible gas as %LEL. Those readings cover different hazards: they do not measure CO₂, and a low %LEL reading does not establish that solvent exposure is acceptable. Start with the gases present, then choose the measuring ranges and sampling method.

Read article
Eranntex technical guide: High H₂S peak, but low TWA? A magnifying glass inspects an illustrative peak in monitoring records.
Technical guide

High H₂S Peak, Low TWA: What to Check Next

A high hydrogen sulfide (H₂S) peak and a low time-weighted average (TWA) can describe the same monitoring period. A low TWA does not cancel the peak. Check the event time and sampling location, the TWA calculation window and reset history, and the measurement records around the event.

Read article
Eranntex technical guide cover: gas detector quotation checklist, with project requirement sheets, a clipboard and pencil.
Technical guide

Gas Detector Quotation Preparation Checklist

A technical quotation needs the target gases and ranges, simultaneous monitoring requirement, site conditions, sampling approach, interfaces and documents. This checklist shows what each input helps verify.

Read article

Looking for a model specification or certificate?

Find product documents